Sprayplast matt black (spray can of 500 ml)

Special paint for creating a removable film. For treating smooth, non -sucking surfaces, such as white metal, aluminum, glass and surfaces treated with 2K lacquers. Motip removable varnish is not suitable for treating surfaces treated with 1K paint systems.

• Quick -drying
• Good cover
• Resistant to chemicals and weather influences
• 360 ° valve

Physical and chemical properties

• Content: 500 ml
• Basic: synthetic rubber
• Fox content: approximately 92% W/W
• Funnious: approximately 8% W/W
• Efficiency: 0.2 0.4 m² when applying 5 layers
• Dust -dry: after about 10 minutes
• Adhesive: after about 30 minutes
• Removable: after 2 hours
• Heat resistant: up to 100 ° C

Instructions for use, the instructions on the packaging properly read and follow.

Pre -treatment properly clean the surface, without sanding. The surface must be clean, dry and free of grease. To apply removable paint, do not apply a primer.

Lacquering the surface must be clean, dry and fat -free. Bring the spray can to room temperature. Ideal processing temperature 15 to 25 ° C and a relative humidity of <65%. Shake well for 3 minutes before use and spray a test piece. Distance to the surface to be treated approximately 25 to 30 centimeters.

Apply at least 5 layers of removable varnish. For a good low structure, required for the later removable paint removal, applying an extra layer to critical places (corners, lace). Apply the layers with an interim of 5 minutes.

The drying time depends on the ambient temperature, the humidity and the applied layer thickness.